We will try to get a photo for each of our products showing you clearly what you get for your money, to break it down for you the general rule is this:

RTF – Ready to Fly everything that you need to get in the air is in the box.

• Transmitter/Controller (TX), receiver (RX), all the servo’s (they move the control surfaces) the batteries and a complete airframe. You may also get some glue and a sheet of transfers or stickers depending on the manufacturer.

PNP – Plug and Play also know as BNF – Bind and Fly

• This is the same as above but you don’t get the Transmitter/Controller (TX) or the receiver (RX).
• These are for people who have a number of planes already and don’t want to have another transmitter lying around or they would rather use their own radio that they are familiar with.

ARTF – Almost ready to fly

• Basically means that the plane may require some items such as the TX, RX and servo’s to complete or a more detailed assembly process than just fitting the wings and rudder. In this case we will try to show you as much as possible in the images we put online. 

We try to be extra careful and tell you what’s required to get you in the air in the specification part of the description.
Of course if your not sure then just ask by emailing us at  This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Here's an example: Lanxiang Mirage 2000 RTF Jet

 

 

Next >